Cracker Tree controller – Pixel led Firework Wifi Controller

There are 3 Types of Pixel led cracker tree controllers available

1. Without Sound type
2. Fixed LED type with sound
3. Manual led setting type with sound
4. Firework Pro Type

Without sound

Without sound type controllers have a fixed number of LEDs that is 100 you make your cracker tree under 100 LED

Fixed LED type with sound

Fixed led with sound type controller have maximum 75 led fixed 50 led in column and 15 led in flair

Manual led setting type with sound

The manual LED setting type with the sound controller has so many features

• Number of led selection in column and Tia
• Speed of LED selections
• Sound output
• Timer options
• the controller connects through Wi-Fi and change many settings through a web page

The circuit is designed to control the fireworks led with different lengths of the cannon body and flare, which can be adjusted by the button or Through a web page on the circuit itself without using any software.

Installation Instructions:

1st step: continue to hold the SET button for 2s, the indicator light is on, then we use 2 + and – buttons on the circuit to set the number of bulbs for the LED in the body.

2nd step: then we press and hold the SET button again for 2s until the indicator light is on, then we use 2 + and – buttons on the circuit to set the number of bulbs for the LED at the ray

3rd step: then press and hold the SET button for 2s  (and the led body will run the demo so we can adjust the running speed of the led body) we use 2 + and – buttons on the circuit to set the speed for the led body

4th step: press and hold the SET button for 2s 3 indicator lights are on (and TIA led demo to adjust the running speed of TIA led) we use 2 buttons + and – on the circuit to set the speed for TIA accordingly

5th step: when setting the speed of the beam, we continue to hold the SET button for 2s, and the circuit will automatically save the state and return to normal operation.

How to run this controller by connecting it to WiFi: 

1st step: First turn on WiFi and location of your mobile(Keep your mobile data off).

2nd step: Go to WiFi section and you will find a signal Pixel LED Cracker Tree controller. You have to connect with that signal. Use Password 12341234 

3rd step: Open your phone browser. Go to the search bar in the browser have to search 9.9.9.9 h. Then a web page will open. Then a web page will open.